Electonic circuits and schematics
Google
  Electronic circuits schematics Home Search Most popular Sitemap  
Search circuits



Categories

Circuits & schematics

  • Audio
  • Automotive
  • Games and entertainment
  • Microcontrollers
  • Miscellaneous
  • Models and model remote control
  • Motor, light and power control
  • Oscillators and timers
  • PC related
  • Power
  • RF circuit
  • Robotics
  • Security and other sensors and detectors
  • Telephone related
  • Test and measurement
  • Video and TV
  • Electronics guide

  • The very first steps
  • On the boards
  • Measuring current and voltage
  • Capacitors
  • ICs, oscillators and filters
  • Diodes I
  • Diodes II
  • Transistors
  • Analogue integrated circuits
  • Digital integrated circuits I
  • Digital integrated circuits II

  • Electronic circuits and electronic schematics


    Schematics > Audio > 50 Watt Amplifier

    50 Watt Amplifier

    This is a handy, easy to build general purpose 50 watt amp. The amp has an input for a radio, TV, stereo or other line level device. It also has a phono input for a record player, guitar, microphone or other un-amplified source. With the addition of a low pass filter at the input, it makes a great amp for a small subwoofer.

    Schematic

    This is the schematic of the 50 Watt Amp

    Parts

    Part Total Qty.

    Description

    R1 1 200 Ohm 1/4 W Resistor
    R2 1 200K 1/4 W Resistor
    R3 1 30K 1/4 W Resistor
    R5 1 1K 1/4 W Resistor
    R6 1 5K 1/4 W Resistor
    R7,R10 2 1 Meg (5%) 1/2 W Resistor
    R8,R9 2 0.4 Ohm 5 W Resistor
    R11 1 10K Pot
    R12,R13 2 51K 1/4 W Resistor
    R14 1 47K 1/4 W Resistor
    C1 1 100uF 35V Electrolytic Capacitor
    C2 1 0.011uF Capacitor
    C3 1 3750pF Capacitor
    C4,C6 2 1000pF Capacitor
    C5,C7,C8 3 0.001uF Capacitor
    C9 1 50pF Capacitor
    C10 1 0.3uF Capacitor
    C11,C12 2 10,000uF 50V Electrolytic Capacitor
    U1,U2 2 741 Op Amp
    U3 1 ICL8063 Audio Amp Transister Driver thingy
    Q1 1 2N3055 NPN Power Transistor
    Q2 1 2N3791 PNP Power Transistor

    Notes

    1. I know I skipped R4. That is not a problem :-)

    2. Distortion is less than 0.1% up to 100HZ and increases to about 1% at 20kHz.

    3. I haven't been able to find anyone who sells a suitable T1. You can always use two 24V 5A units in series. If you are building two amps (for stereo), then I would suggest using an old microwave transformer and rewinding it.

    4. Q1 and Q2 will require heatsinks.

    5. You may have trouble finding U3 because it is discontinued. Please don't email me about sources...I can't find it either. A possible source was sent in by JBWilliams:

    Zigma Electronics
    8803 Shirless Ave.
    Northbridge, CA 91324
    United States
    Phone: 818-772-7590

    Title: 50 Watt Amplifier
    Source: www.electronics-lab.com
    Published on: 2005-02-01
    Reads: 1500
    Print version: Print version

    Other schematics from Audio
  • Sound Level Meter
  • Stereo Tube Amplifier
  • 200W audio amplifier
  • Amplifier of acoustic frequencies with preamplifier
  • Digital Volume Control
  • Speaker Microphone
  • Speech Recorder
  • 1W Bass Power Amplifier
  • 250 mW Audio Amplifier
  • Ultrasonic pest repellent

  • Schematics > Audio > 50 Watt Amplifier


    Экономическое содержание бюджета государства реферат - Weirdsville movie subtitles - курсова робота - Mr. Brooks movie subtitles - Sixth Sense, The - реферат - курсова робота
    Page generation 0.015 seconds
    50 Watt Amplifier