Electonic circuits and schematics
Google
  Electronic circuits schematics Home Search Most popular Sitemap  
Search circuits



Categories

Circuits & schematics

  • Audio
  • Automotive
  • Games and entertainment
  • Microcontrollers
  • Miscellaneous
  • Models and model remote control
  • Motor, light and power control
  • Oscillators and timers
  • PC related
  • Power
  • RF circuit
  • Robotics
  • Security and other sensors and detectors
  • Telephone related
  • Test and measurement
  • Video and TV
  • Electronics guide

  • The very first steps
  • On the boards
  • Measuring current and voltage
  • Capacitors
  • ICs, oscillators and filters
  • Diodes I
  • Diodes II
  • Transistors
  • Analogue integrated circuits
  • Digital integrated circuits I
  • Digital integrated circuits II

  • Electronic circuits and electronic schematics


    Schematics > Motor, light and power control > Infa-Red Remote Control

    Infa-Red Remote Control

    I have received a number of emails requesting schematics for infa-red remotes. So here is one. This remote transmits a tone using an infa-red LED. This tone is decoded by the receiver. Since the receiver only switches when it "hears" the tone, there are no accidental activations.

    Schematic For Transmitter
    This is the schematic of the IR Transmitter

    Schematic For Receiver
    This is the schematic for the IR Receiver

    Parts:

    Part Total Qty. Description Substitutions
    R1 1 22K 1/4W Resistor  
    R2 1 1 Meg 1/4W Resistor  
    R3 1 1K 1/4W Resistor  
    R4, R5 2 100K 1/4W Resistor  
    R6 1 50K Pot  
    C1, C2 2 0.01uF 16V Ceramic Disk Capacitor  
    C3 1 100pF 16V Ceramic Disk Capacitor  
    C4 1 0.047uF 16V Ceramic Disk Capacitor  
    C5 1 0.1uF 16V Ceramic Disk Capacitor  
    C6 1 3.3uF 16V Electrolytic Capacitor  
    C7 1 1.5uF 16V Electrolytic Capacitor  
    Q1 1 2N2222 NPN Silicon Transistor 2N3904
    Q2 1 2N2907 PNP Silicon Transistor  
    Q3 1 NPN Phototransistor  
    D1 1 1N914 Silicon Diode  
    IC1 1 LM308 Op Amp IC  
    IC2 1 LM567 Tone Decoder  
    LED1 1 Infa-Red LED  
    RELAY 1 6 Volt Relay  
    S1 1 SPST Push Button Switch  
    B1 1 3 Volt Battery Two 1.5V batteries in series
    MISC 1 Board, Sockets For ICs, Knob For R6, Battery Holder  
    RELAY 1 6 Volt Relay  

    Notes:

    1. To adjust the circuit, hold down S1 while pointing LED1 at the receiver. Adjust R6 until you hear the relay click.

    2. You can increase range by using a high output LED for LED1.

    3. Bright light will stop the receiver from responding to the transmitter.

    Title: Infa-Red Remote Control
    Source: www.aaroncake.net
    Published on: 2005-02-03
    Reads: 459
    Print version: Print version

    Other schematics from Motor, light and power control
  • LED or Lamp Pulser
  • Alternating Flasher
  • Automatic Dual output Display
  • LED or Lamp Flasher
  • Triple Stroboscope
  • Automatic 12 Volt Lamp Fader
  • PWM Motor/Light Controller
  • Brightness of multiple displays control circuit
  • Two-wire Lamp Flasher
  • Flashy Christmas Lights

  • Schematics > Motor, light and power control > Infa-Red Remote Control


    subtitles - Oz - Battlestar Galactica - The X-Files season 9 subtitles - реферат - Нагідки лікарські реферат - реферат
    Page generation 0.014 seconds
    Infa-Red Remote Control