Schematics > Audio > Bass-treble tone control circuit
Bass-treble tone control circuit
The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit
for stereo applications in car radio, TV and audio systems. An additional control
input allows loudness compensation to be simply effected. Four control inputs
provide control of the bass, treble, balance and volume functions through
application of DC voltages from a remote control system or, alternatively, from
four potentiometers which may be biased from a zener regulated supply provided
on the circuit. Each tone response is defined by a single capacitor chosen to
give the desired characteristic.
Features:
Wide supply voltage range, 9V to 16V
Large volume control range, 75 dB typical
Tone control, ±15 dB typical
Channel separation, 75 dB typical
Low distortion, 0.06% typical for an input level of 0.3 Vrms
High signal to noise, 80 dB typical for an input level of 0.3 Vrms
Few external components required
Note: Vcc can be anything between 9V to 16V and the output capacitors are
10uF/25V electrolytic.
Title: Bass-treble tone control circuit
Source: www.electronics-lab.com
Published on: 2005-02-01
Reads: 1638
Print version:  Other schematics from Audio
Digital Volume Control Audio Visual Indicator for Telephones Phono Preamplifier Amplifier of acoustic frequencies with preamplifier Speech Recorder 3 Transistor Audio Amp (50 milliwatt) Classic Audio Mixer 10W Mini Audio Amplifier Simple Intercom Baxendall Tone Control
Schematics > Audio > Bass-treble tone control circuit |
Home
