Schematics > Audio > Low impedance microphone amplifier
Low impedance microphone amplifier
Description
The circuit is a microphone amplifier for use with low impedance (~200 ohm) microphones.
It will work with stabilized voltages between 6-30VDC. If you don't build the impedance
adapter part with T1, you get a micamp for higher impedance microphones. In this
case, you should directly connect the signal to C7.
Schematic diagram
Layout of board
printed PCB
Parts
|
|
|
|
|
| R1=15k |
|
C1= 3k9 |
|
U1= TL081 |
| R2= 150k |
|
C2= 100u |
|
D1= 1N4148 |
| R3= 2k2 |
|
C3= 22u |
|
CN1= SIL6 |
| R4= 820 |
|
C4= 4u7 |
|
|
| R6= 10k |
|
C5= 470u |
|
|
| R7= 10k |
|
C6= 10u |
|
|
| P1= 1M |
|
C7= 100n |
|
|
|
|
C8= 47u UNIPOLAR |
|
Title: Low impedance microphone amplifier
Source: www.electronics-lab.com
Published on: 2005-02-01
Reads: 360
Print version:  Other schematics from Audio
Sound Pressure Level Meter 3 Channel Spectrum Analyzer Infrared Head Phones Guitar Amplifier 50 Watt Amplifier 25W Mosfet audio amplifier 22W Stereo Amplifier Ultrasonic Switch 10W Audio Amplifier with Bass-boost Ultrasonic pest repellent
Schematics > Audio > Low impedance microphone amplifier | 
Home
