Schematics > Telephone related > Ringing Phone Light Flasher
Ringing Phone Light FlasherI have received several emails asking how to connect up some lights so that
when the phone rings, they flash. This is very useful in a situation were there
is lots of noise and it is impossable to hear the phone, such as a workshop.
Here is such a device. The ring detect part of this circuit came from
http://www.hut.fi/Misc/Electronics/circuits/telephone_ringer.html.
Schematic
Parts:
| Part |
Total Qty. |
Description |
Substitutions |
| C1 |
1 |
0.47uF 250V Capacitor |
|
| R1, R2 |
2 |
10K 1/4 W Resistor |
|
| R3 |
1 |
1K 1/4W Resistor |
|
| D1, D2 |
2 |
20V 1/4W Zener Diode |
|
| D3 |
1 |
1N4148 Diode |
|
| Q1 |
1 |
2N3904 NPN Transistor |
2N2222 |
| U1 |
1 |
4N27 Opto Isolator |
|
| RELAY |
1 |
Solid State Or Regular Relay (See Notes) |
|
| MISC |
1 |
Case, Wire, Board |
|
Notes:
1. You may need to use a lower voltage zener for D1 and D2.
2. You can use a regular relay instead of a solid state relay, but the arcing
accross the contacts may destroy it pretty quickly.
3. Be very sure that you have not accidentally connected 120V to the phone
line when building and installing this circuit.
Title: Ringing Phone Light Flasher
Source: www.aaroncake.net/circuits/
Published on: 2005-02-10
Reads: 260
Print version:  Other schematics from Telephone related
Phone line indicator The Link A2B+1 (the Link Telephone Intercom - DTMF version) Telephone Audio Interface Cut Phone Line Detector FM Telephone Bug Telephone call meter using calculator & COB Smart Phone light Phone Broadcaster Simple Phone Tap Telephone line based audio muting and light on circuit
Schematics > Telephone related > Ringing Phone Light Flasher | 
Home
