Schematics > Test and measurement > XTal Tester
XTal Tester
This
is a simple XTal tester circuit. T1 and XTal have formed an oscillator. C1 and
C2 are voltage divider for oscillator. if the XTal is safe, the oscillator will
work well and its output voltage will be rectified by C3, C4, D1 and D2, then T2
will run and LED will light. The circuit is suitable to test 100KHz - 30MHz Xtal.
Title: XTal Tester
Source: www.electronics-lab.com
Published on: 2005-02-10
Reads: 279
Print version:  Other schematics from Test and measurement
Car Water Temperature Capacitance Meter High Resistance Voltmeter Thermostat for 1KW Space Heater (SCR controlled) Voltage follower with 1G ohm input resistance Picoammeter circuit with 4 ranges Contactless Mains Voltage Indicator Transistor Tester Led display digital Voltmeter Linear Resistance Meter
Schematics > Test and measurement > XTal Tester | 
Home
