Circuits & schematics

Electronics guide

Electronic circuits and electronic schematics

Very simple and useful circuit for amplify the stereo signals .The circuit dissipates roughly 28 watts of heat, so a good heatsink is necessary. The chip should run cool enough to touch with the proper heatsink installed .the circuit operates at 12 Volts at about 5 Amps at full volume. Lower volumes use less current, and therefore produce less heat. R1 is also a 5% resistor.

Stereo Amplifier circuit

Title: 22W Stereo Amplifier
Source: unknown
Published on: 2005-08-27
Reads: 732
Print version: