Schematics > Audio > Baxendall Tone Control
Baxendall Tone ControlBased on the classic Baxendall tone control circuit, this provides a
maximum cut and boost of around 10dB at 10KHz and 50Hz. As the controls are
passive, the first transistor, Q1, is configured as common-collector to act as a
buffer stage. The last transistor, Q2, provides a slight boost. Note that the
gain of the output of the Baxendall circuit is less than one because of passive
nature of it. The output is designed to feed an amplifier with input impedance
of 10kohms to 250kohms.
Title: Baxendall Tone Control
Source: unknown
Published on: 2005-08-27
Reads: 1592
Print version:  Other schematics from Audio
Musical Instrument (Expandable) Graphic Equaliser Surround Sound Decoder 60W Guitar Amplifier 250 mW Audio Amplifier 50 Watt Amplifier Stereo Channel Selector Stereo Preamplifier with Bass-boost 1.5W Audio power amplifier (12V) 3 Channel Spectrum Analyzer Audio Visual Indicator for Telephones
Schematics > Audio > Baxendall Tone Control |
Home
